Effect Pedal for Bass

The frequency range that can be managed with the GEB-7 goes from 50 Hz to 10 KHz, allowing it to work with all types of bass, even 5-string ones. Precise tonal adjustment is achieved with the seven frequency bands, which offer greater control over all mid frequencies, which are very important for achieving a big bass sound. Each band can be boosted or cut...
The CEB-3 has a low frequency filter so you can select the frequency band to which the effect is applied. This allows you to obtain all types of chorus, from a light one on harmonics only to a strong one on all frequency bands. The CEB-3's built-in space synthesis effect ensures a natural and spacious chorus effect.
• Expressly designed for bass • Thanks to the Level control it is possible to maintain the direct sound, with all its thrust, and mix it with the effected sound • Controls: Level, Tone, Depth, Rate • True Bypass • Made with high quality components • Ultra-Compact Dimensions • Full metal chassis • Power supply: DC 9V (Power supply not included) •...
CONTROLS GAIN TIME COLOUR WET SWITCHES DOWN and UP (scroll through presets) TRUE BYPASS (effect on/off) REAR PANEL INPUT: 1x ¼” mono jack OUTPUT: 2x ¼” mono jack (mono L, stereo L+R) USB control (link to PC) POWER jack (DC 12V) * PRESETS 6 (user modifiable) DIMENSIONS 6.7" x 5.7" x 2.4" / 170 x 145 x 60 mm WEIGHT 1.61lb / 730g * 12VDC power supply included
Nominal Input Level-20 dBuInput Impedance1 M ohmNominal Output Level-20 dBuOutput Impedance1 k ohmRecommended Load Impedance10 k ohms or greaterBypassBuffered bypassControlsGAIN knob BALANCE knob EQ HIGH/LOW knob LEVEL knob Pedal switchIndicatorCHECK indicator (Used for indication of check battery)ConnectorsINPUT jack: 1/4-inch phone type OUTPUT jack:...
SANSAMP BASS DRIVER DI (V2) - PEDAL PREAMPLIFIER FOR BASSCompletely analogue circuit - Active tone controls (+/-12dB) - Controls: Drive, Bass, Mid, Treble, Presence, Blend, Level - Possibility of selecting frequencies on Mid and Bass - Connections: In/Output Jack, Parallel Output, XLR Output - Power: 9 Volt Battery, Power Adapter (Optional) Dimensions:...
DIGITAL PEDAL TUNER FOR GUITAR AND BASS Digital tuner for guitar and bass, also recommended for 7-string guitars and 5-string basses. It is equipped with a display with 108 high brightness LEDs. Main features Digital pedal tuner for guitar and bass True Bypass Display with 108 high brightness LEDs Great tuning accuracy, up to 1/100 of a semitone...
Bass

Mooer D7 Delay

MOOEFPED7DELA
€81.15
DELAY/LOOPER PEDAL EFFECT FOR GUITAR The Mooer D7 Delay is the redesigned multi-delay and looper effects pedal from the Micro Series. Using the 7 LED lights as a guide, this pedal features 6 customizable digital delay effects (Tape, Liquid, Rainbow, Galaxy, Mod-Verse, Low-Bit) with the seventh LED indicating the built-in looper can be used in tandem with...
AUTO WAH PEDAL EFFECT FOR GUITAR The Mooer Funky Monkey Auto Wah provides a unique wah effect. It features three peak modes: Low, Mid and Hi so you can really control the sound you get. Its metal casing makes it durable and stage-ready. Like most great effects pedals it features true bypass. Main features True Bypass Auto-Wah effect with a wide...
€56.56
DOUBLE EFFECT DIGITAL FLANGER PEDAL Take to the skies with Mooer 's Jet Engine Double Flanger Pedal. This modulation micro stompbox packs two different digital algorithms that can beautifully recreate all your favorite analog flanger effects from the '70s and '80s. The beauty of it being digital is that all the effect parameters are extremely flexible....
PHASER PEDAL EFFECT FOR GUITAR The MOOER Liquid is a portable digital Phaser, full of innovative and very interesting features. The large control knob allows you to choose between 5 different types of Phaser ranging from typical vintage sounds, up to the most modern, extreme and spatial modulations, passing through everything in between. After selecting...
€56.56
DIGITAL PEDAL REVERB EFFECT Digital Reverb features three Reverb modes. Room mode produces different reverb sounds, from the typical Room to the larger Hall. Spring mode simulates the sound of a typical spring reverb, producing classic 60s surf sounds. Finally, the Shimmer mode adds a great richness of harmonics to the reverb sound, producing an open,...
Boss BB-1X Bass Driver
  • -€20.00
  • NON DISPONIBILE
Not available
  • NON DISPONIBILE
NON DISPONIBILE
The BOSS BB-1X Bass Driver is a top quality pedal designed to make your bass sound powerful and punchy. More than just a pedal, the BB-1X is like a preamp, and it's a fundamental element for sound quality. It works on the nuances of the bass, the amp and your playing, emphasizing all these characteristics as best as possible. Featuring modern BOSS MDP...
Markbass MB7 Distortion
  • NON DISPONIBILE
Not available
  • NON DISPONIBILE
NON DISPONIBILE
Input: mono ¼” jack Input impedance: 1.5 Mohm/6Vpp Output: mono ¼” jack Output impedance: 100 ohm/6Vpp Drive: +50 dB (maximum gain) Output level: 0 to max 7-band graphic EQ (+/- 16dB): 40, 80, 250, 400, 1200, 2000, 4000 Hz Power requirements: DC Input +9/+12VDC or standard 9V battery*
Markbass Compressor
  • NON DISPONIBILE
Not available
  • NON DISPONIBILE
NON DISPONIBILE
CONTROLS GAIN THRESHOLD RATIO ATTACK RELEASE VOLUME ON/OFF SWITCH REAR PANEL INPUT jack OUTPUT jack POWER jack (DC 12V) TECHNICAL SPECS Input Impedance: 300 Kohm Gain: 0 ÷ +16dB Threshold: 30mVp ÷ 1.8 Vp Ratio: 1:1 ÷ 1:? (hard limiter) Attack: 2 ÷ 50 ms Release: 100 ÷ 750 ms Output Impedance: 100 ohms Power Requirements - DC input: +12VDC / 600mA minimum*...
Markbass Mini Distortion
  • NON DISPONIBILE
Not available
  • NON DISPONIBILE
NON DISPONIBILE
Input: 1/4" mono jack Input Impedance: 1 MOhm / 6 Vpp Output: 1/4" mono jack Drive: +60 dB (maximum gain) Tone 1: 200Hz - 2.5kHz Tone 2: 0dB - 20dB @ 800Hz Power supply: +9V DC / +12V DC Power supply: 12V DC included Dimensions: 48 x 38 x 105mm Weight: 0.260kg
Markbass Super Synth
  • NON DISPONIBILE
Not available
  • NON DISPONIBILE
NON DISPONIBILE
Synth Synth / Octaver with true bypass circuit Controllers: GAIN, CUT FREQ / OCT -1, TONE / OCT 1, LEVEL / DRY control Switches for PRESETS, TRUE BYPASS and SYNTH / OCTAVER switches USB Port for setting and storing additional effect parameters using MARKBASS software (downloadable) Large display Power supply via DC 12 Volt power supply (included) Output...
Showing 1-24 of 27 item(s)
Effect Pedal for Bass
Product added to wishlist
Product added to compare.